Trailer Mounted Towable Boom Lifts-Summit Series

Jump to: Options & Accessories | Applications | Models | Specifications

Our new Summit Series trailer-mounted towable booms raise the bar and redefines the design, features and reach by which all towable boom lifts will be measured. With 4 new models to choose from in heights to 61' and outreach to 33' these lifts provide the best value in the industry and will lift your bottom line to new heights.

Standard Features

Easy-To-Use Controls

(Shown at Right)
All Summit Series booms feature platform and ground controls that have an easy-to-understand display panel with logically positioned control buttons.

Material Lifting System

A material lifting hook and quick disconnect platform allows any Summit Series Boom to be converted into a lightweight crane in seconds.

Air Line to Platform

⁴
Featuring a 3/8-inch diameter, 300 psi rated nylon braided air hose and includes both a ¼-inch and a 3/8-inch universal female coupler that can be attached to the hose end at the platform bulkhead, ensuring that you’ll always be able to connect your tools to air power when you’re on the job site.

Water Line to Platform

Features a 3/8-inch diameter, steel braided, pressure washer grade hose rated at 4,000 psi.

Outlets to Platform

110V GFI protected electrical outlets to the platform.

Options & Accessories

Drive and Set

⁹
This option allows an operator to drive, deploy and retract outriggers and automatically level the machine from the platform when it is in the fully lowered position.

Retractable Axle

⁵ (2622T & 3522A Only)
Providing industry leading access, this option allows the width of the machine to be narrowed to only 34 inches, providing the ability to move the unit through single doorways or outdoor fence gates.

Horizontal Jib Rotator Option

⁶ (3522A & 4527A Only)
A hydraulically actuated rotator provides 180 degree horizontal movement of the jib providing improved access to hard-to-reach areas or in areas where machine set-up is difficult. The platform rotator can also be integrated to allow an operator to “wrap-around” buildings. ^{7 8}

Manual Platform Rotate

A manual rotate mechanism allows the operator to rotate the platform 90-degrees in either direction.

Electric Brakes

Optional electric brakes are available with fixed or combination hitch couplers. (Not available on models with Drive and Set)

DC / Gas Hybrid

This option includes a 4,500-watt (4.9kVA) continuous duty AC generator powered by a 9HP Honda gas engine featuring:
• Electric start and remote choke.
• Generator supplies 110/60 AC power to the 40-amp charger and upper and lower GFI outlets providing remote power at both the platform and turntable. Strongly recommended for models equipped with the drive and set option.

Accessory Mounting Tray

(Telescopic only) ¹
Telescopic models can be equipped with up to two additional accessory mounting trays to accommodate generators, air compressors and pressure washers.

Additional Battery Pack

(Telescopic only) ²
Doubles the available battery power and lift cycles by adding an additional bank of batteries.

Combination Hitch

³
A large variety of hitch couplers are available for the Summit Series product line.

1.The right hand accessory mounting plate option is not available on Gas/DC Hybrid powered models.
2. Additional charging time is required to fully charge the system.
3. All Summit Series Booms come standard with a fi xed height, heavy-duty 6,000 lb rated 2-inch ball hitch (except the 5533A, which comes standard with the adjustable height combination hitch and 2-inch lever-lock coupler).
4. The 1/4-inch universal coupler accepts up to six different styles of 1/4-inch male hose fi tting connectors and the 3/8-inch coupler accepts up to four different styles of 3/8-inch male hose fi tting connectors.

5. The optional retractable axle system features a patent-pending dual mechanical interlock system that deters retracting the axles while the trailer is hitched to a towing vehicle and physically blocks the opening of the trailer hitch to discourage operators from hitching their vehicle to the trailer while the axles are in the retracted position. The system also includes a secondary interlocking system, preventing axle retraction during towing. 6.The Horizontal Jib Rotator Option decreases platform capacity to 440 lb.
7.The Platform Rotator Option decreases platform capacity to 440 lb.
8. The Platform Rotator and Jib Rotator can only be combined on the 4527A. The 3522A offers one or the other.
9. Designed and intended for use on fl at, fi rm surfaces only. Not for use in rough terrain or on steep inclines

Applications

Construction
Municipalities
Roofing
Golf Courses
Schools and Universities
Museums
Agriculture

Park Services
Restaurants
Shopping Complex
Churches
Truss Placement
HVAC Installation
Sign Companies

Decorating
Roof Maintenance
Cleaning
Lighting Maintenance
Satellite Installation
Security Companies
Landscapers

Pole Buildings
Residential Construction
Tree Trimming
Pressure Washing
Painting
Remodeling
Eaves Maintenance

Models

2622T Telescopic Boom Lift

The 2622T is the 5th addition to the Summit Series™ line of trailer mounted boom lifts. The 2622T provides 32.5' of working height and 22' of outreach and features an automatic, self-leveling hydraulic outrigger system that allows for setup in 30 seconds when all four outriggers are deployed simultaneously.

3522A Articulating Boom Lift

Introducing the new 3522A Articulated Aerial Work Platform. The trailer-mounted boom lift provides 43' of working height, 22' outreach, 19' up and over height, and features an automatic, self-leveling hydraulic outrigger system that allows for setup in 30 seconds when all four outriggers are deployed simultaneously. The outriggers provide an industry leading leveling capability of 12.5 degrees and feature large, 10" diameter non-marking footpads for use on rough terrain job sites or sensitive flooring applications.

3632T Telescopic Boom Lift

Meet the new 3632T Telescopic Aerial Work Platform. The trailer-mounted boom lift provides 42' of working height and 32' of outreach and features an automatic, self-leveling hydraulic outrigger system that allows for setup in 30 seconds when all four outriggers are deployed simultaneously.

4527A Articulating Boom Lift

The trailer-mounted boom lift provides 51' of working height, 27' outreach, 20' 9" up and over height, and features an automatic, self-leveling hydraulic outrigger system that allows for setup in 30 seconds when all four outriggers are deployed simultaneously. This new 4527A Articulated Aerial Work Platform is available with either 24v DC battery power or a combination DC and Honda gas hybrid engine package.

5533A Articulating Boom Lift

Introducing the new 5533A Articulated Aerial Work Platform. The trailer-mounted boom lift provides 61' of working height, 33' outreach, 23 'up and over height, and features an automatic, self-leveling hydraulic outrigger system that allows for setup in 30 seconds when all four outriggers are deployed simultaneously. The 5533A can be operated from either the platform or ground control station. Both feature a display panel with control buttons that are logically positioned around a single machine image for easy identification of button functions.

Specifications	3522A [133/70A]	4527A [157/82A]	5533A [188/102A]	2622T [101/67T]	3632T [134/98T]
Working Height¹	42' 2" (12.9m)	51' 8" (15.8m)	60' 10" (18.5m)	32' 9" (10m)	42' 5" (12.9m)
Max. Platform Height²	37' 2" (11.3m)	45' (13.7m)	55' 3" (16.8m)	26' 6" (8.1 m)	37' 6" (11.4m)
Horizontal Outreach³
Max. from Centerline Max. from Outrigger Edge	22' 6" (6.9 m) 17ft5in(5.3m)	27' (8.2 m) 21' (6.4 m)	33' 1" (10.1m) 27' 4" (8.3m)	22' (6.7m) 17ft1 1/2" (5.2m)	32' (9.8 m) 27' (8.2 m)
Up and Over Height	17' 3" (5.3m)	20' 9" (6.3 m)	23' 9" (7.2 m)	N/A	N/A
Turntable Rotation	700° non-continuous	700° non-continuous	700° non-continuous	700° non-continuous	700° non-continuous
Load Capacity⁴	500 lbs (227 kg)	500 lbs (227 kg)	500 lbs (227 kg)	440 lbs (200 kg)	500 lbs (227 kg)
Leveling Capability	12 1/2°	12 1/2°	12 1/2°	12 1/2°	12 1/2°
Stowed Dimensions
Height Length Width	76 3/4" (195 cm) 16' 6" (5m) 5' 5 1/2" (167 cm)	76 3/4" (195 cm) 19' 11" (6.1 m) 5' 5 1/2" (167 cm)	78" (198 cm) 23' 4" (7.1m) 5' 6 1/4" (168 cm)	78 1/4" (197 cm) 16' 3" (5m) 5' 5 1/2" (167 cm)	76 3/4" (195 cm) 22' 2" (6.8 m) 5' 5" (165 cm)
Platform Dimensions
Height Length Width	43" (109 cm) 30" (76 cm) 48" (122 cm)	43" (109 cm) 30" (76 cm) 48" (122 cm)	43" (109 cm) 30" (76 cm) 48" (122 cm)	43" (109 cm) 30" (76 cm) 48" (122 cm)	43" (109 cm) 30" (76 cm) 48" (122 cm)
Platform Rotation / Type⁵	120° / Manual	120° / Manual	120° / Manual	120° / Manual	120° / Manual
Jib
Length Vertical motion Horiz. Rotate / Type⁵	4' 3" (1.3m) 150° (+70 /-80) 180°/Hydraulic	4' 3" (1.3m) 150° (+70 /-80) 180°/Hydraulic	4' 3" (1.3m) 150° (+70 /-80) N/A	N/A N/A N/A	N/A N/A N/A
Outrigger Footprint
Length Width Footpad Diameter	11' 3/4" (3.4m) 9' 10 1/2" (3m) 10" (25 cm)	12' 4" (3.8m) 11' 4" (3.5m) 12 1/2" (32 cm)	12' 11" (3.9m) 12' 9" (3.9m) 12 1/2" (32 cm)	11' 3/4" (3.4m) 9' 10 1/2" (3m) 10" (25 cm)	12' 4" (3.8m) 11' 4" (3.5m) 12 1/2" (32 cm)
Tongue Weight⁶	190 lbs (86 kg)	170 lbs (77 kg)	270 lbs (123 kg)	120 lbs (54 kg)	160 lbs (73 kg)
Parking Brake	Standard	Standard	Standard	Standard	Standard
Tow Speed Rating	65mph (105km/h)	65mph (105km/h)	65mph (105km/h)	65mph (105km/h)	65mph (105km/h)
Tire Size	ST 205/75 R14C	ST 225/75 R15D	ST 225/75 R15D	ST 205/75 R14C	ST 225/75 R15D
Control System	24V DC	24V DC	24V DC	24V DC	24V DC
Batteries	4 x 6V 245 Ah	4 x 6V 245 Ah	4 x 6V 245 Ah	2 x 12V 115 Ah	4 x 6V 245 Ah
Total Weight (GVW)⁶	3,235 Ib (1,467 kg)	4,065 Ib (1,844 kg)	4,855 Ib (2,202 kg)	2,890 Ib (1,311 kg)	4,400 Ib (1,996 kg)

1. The metric equivalent of working height adds 2 m to the maximum platform height. U.S. adds 6 ft to the maximum platform height.
2. Maximum platform height when outriggers are fully extended on a level surface.
3. As is standard industry practice, this is measured from the edge of the platform plus 20 in (.5 m) arm reach.

4. Capacity may vary depending on options equipped on machine. Consult factory for details.
5. These are offered as optional equipment.
6. Weights will vary depending on options and/or market destination. Consult factory for details.

Top of Page